Griffo’s Steel Gate Frames Brisbane.
Griffo’s Gate Frames Brisbane.
We Manufacture our Frames in Brisbane from 25x25x1.6 and 50x25x1.6mm galvanised RHS and fit them with a pair of heavy duty Ball Bearing Hinges. Griffo’s frame are manufactured singularly and in pairs for bigger openings. After building a gate all exposed welds are heavily coated with Cold Galvanised Paint to prevent rusting.
When ordering a Griffo’s steel gates and frames you will need to with the height and width you need us to build for you. If you need the frame to be supplied with hinges, you will need to tell us what side they are to be attached to and the direction of swing for your new gate. We have a range of accessories for gates which includes Pad Bolts,D Latches and Drop Bolts which are available to finish your new Frame.
Most of our steel Gate Frame are built so that the timber palings can overhang the frame, the top by around 100mm and the bottom by approximately 200mm. The extra length on the bottom of the gates is to allows for the palings to be cut on an angle to suit the rise and fall of the ground level. Angled or Raked, in RHS can also be made to suit the slope of your ground.
At Griffo’s we use Australian Made Galvanised RHS steel when manufacturing of our Gate Frames. Our steel is a pre-galvanised, inside and out, of the steel box section.
Griffo’s believe in realistic pricing so you will find it difficult to beat our prices.
Griffo’s Gate Frames Brisbane will also deliver your new anywhere in Brisbane for a small delivery fee.
Call for a price on your new steel frames. Mick 0414892480
Single Gate Frames start at $99.
Set of Double Gate Frames start from $230.
Delivery is $30 anywhere in Brisbane. Next day Delivery can be arranged.